In 2008 SISIS added to its extensive range of machinery, with the introduction of the Arrow. In 2009 and 2010 they also added the MultiSlit 1500, Rolaspike 180, MultiTIner 180 and 2 new powered Rotorakes.

SISIS ARROW/AERAID

Powered Vertical Action Aerator

The SISIS ARROW is a vertical-action aerator designed for golf greens, tees and approaches; cricket squares; bowling greens; Contractors and Local Authorities. This heavy-duty machine, with 10hp engine, utilises hard-wearing components used on the well-proven AER-AID JAVELIN.

The AerAid System allows turf professionals to inject air into the root zone at a fast working rate, creating thousands of fissures. The air injection tines are designed to use the maximum air available from the compressor which produces clean, fresh air at a constant rate.

Now available is the SISIS ARROW/AERAID giving all the benefits of the tractor mounted SISIS AerAId in a pedestrian machine which has a working width of 600mm. A wide range of interchangeable tines is available with working depth up to 12.5cm.

SISIS TRACTOR MOUNTED AERATORS

Now available from SISIS are the MultiSlit 1500, Rolaspike 180 and Multitiner 180.

The Multislit 1500 is a deep slitting aerator giving deep, clean penetration with minimal surface disturbance. Interchangeable tines are available.

The Rolaspike 180 is a 6ft wide Sarel type roller with three rotating drums on one shaft.

The Multitiner 180 is a drum-type aerator for use on fine turf. Interchangeable tines are available.

SISIS SCARIFIERS

Recently introduced to the range of SISIS scarifiers are the pedestrian ROTORAKE 450 and the SISIS ROTORAKE 602.

The SISIS Rotorake 450 is a scarifier with power to the reel and assisted drive to the rear tyres for removal and control of thatch on fine turf.

The SISIS Rotorake 602 is a heavy duty powered scarifier/dethatcher and linear aerator which has a seeder option available.

Both machines have a range of interchangeable reels available.

SISIS ROSCA 1500

Ride-on brushing system for synthetic turf

The SISIS ROSCA 1500 is a ride-on brushing system, comprising a pair of mid-mounted oscillating brush units and three rear-mounted brushes.
Designed specifically for maintaining synthetic surfaces, the oscillating brushes of the ROSCA will be used periodically to keep infill mobile, preventing surface compaction and loss of porosity. The infill level is maintained at a constant depth, giving consistent playing characteristics, and preventing pill damage caused by reduced infill levels. The “flicking” action is designed to be thorough and effective, but gentle to avoid damage to the synthetic grass fibres. Fewer passes are required than when using conventional drag brushes, causing less compaction.
The rear-mounted brushes are designed for routine, frequent use to lift the pile and remove scuff marks. The outer brushes fold for transport and storage.
The ROSCA 1500 is powered by an 11.5hp Briggs & Stratton engine with electric start, and can also be used to tow the SISIS SSS/1000 sweeper, and other implements in the SISIS range.
Click here for details

TIF Towed Implement Frame

The TIF towed implement frame enables the use of all SISIS Quadraplay implements. Optional extension arms allow any two implements to be used simultaneously.

Manual lift – optional electric lift available.